Putties | Milliput

Milliput putty for scale modelling and miniatures

What Milliput putty will you find here?

• Milliput Standard Yellow-Grey: versatile for fills, rebuilding and general sculpting in plastic, resin or metal.
• Other variants and colours on the Milliput brand page.

When to use it

• Joints and gaps in fuselages, hulls, bodies and bases.
• Repairs of edges, corners and damaged parts.
• Sculpting textures, rivets, welds and small additions.

Accessories that pair well

• Sandpaper sponge 100, 180 and 280: removal, refining and fine finish after curing.
• Files to trim edges and transitions.
• Cutting tools: precision cutter, T11 blades and flush cutter.
• Cutting mats (e.g. A4) to work clean.
• Tweezers to handle parts without leaving marks.
• Masking tape (3 mm, 10 mm) to protect detail around the area to fill.

Complementary products

• Primers to check the finish after sanding.
• Auxiliary products (varnishes, cleaners) to finish and protect.
• See all putty if you're looking for alternatives by technique/material.

How to use it (step by step)

1. Prepare the area: cut, dry-fit and trim with a file/sandpaper.
2. Mix the two parts until you get a uniform colour and even texture.
3. Apply with a spatula/toothpick; smooth with a slightly dampened tool.
4. Let it cure and sand from medium to fine grit until the repair blends in; then check with primer.